MADGETECH RHTEMP1000EX
주요특징
· 제품 사양
General
Memory 32,767 readings
Reading Rate 1 reading every 2 seconds up to 1 reading every 12 hours
Battery Life 2 years typical at 15 minute reading rate
Material 316 Stainless Steel/Radel
Dimensions 1.7 in x 0.97 in x 0.97 in (42 mm x 24.6 mm x 24.6 mm)
IP Rating (Not Rated) Caution: Do not submerge this product to retain IS rating.
Operating Environment -40 °C to +80 °C (-40 °F to +176 °F), 0 %RH to 95 %RH (case properly sealed)
Required Interface Package IFC400 or IFC406
Approvals CE
ATEX
IECEx
FM 3610
Temperature
Temperature Sensor Resistance Temperature Detector (RTD)
Temperature Range -40 °C to +80 °C (-40 °F to +176 °F)
Temperature Resolution 0.01 °C (0.018 °F)
Temperature Calibrated Accuracy ±0.5 °C (0 °C to 55 °C), ±0.9 °F (32 °F to 122 °F)
Humidity
Humidity Sensor Capacitive Polymer
Humidity Range 0 %RH to 100 %RH (non-condensing)
Humidity Resolution 0.1 %RH
Humidity Calibrated Accuracy ±3 %RH maximum
Humidity Specified Accuracy Range 25 %RH to 75 %RH
+20 °C to +40 °C
Hysteresis Error 1 % Typical,
3% Maximum
General
Memory 32,767 readings
Reading Rate 1 reading every 2 seconds up to 1 reading every 12 hours
Battery Life 2 years typical at 15 minute reading rate
Material 316 Stainless Steel/Radel
Dimensions 1.7 in x 0.97 in x 0.97 in (42 mm x 24.6 mm x 24.6 mm)
IP Rating (Not Rated) Caution: Do not submerge this product to retain IS rating.
Operating Environment -40 °C to +80 °C (-40 °F to +176 °F), 0 %RH to 95 %RH (case properly sealed)
Required Interface Package IFC400 or IFC406
Approvals CE
ATEX
IECEx
FM 3610
Temperature
Temperature Sensor Resistance Temperature Detector (RTD)
Temperature Range -40 °C to +80 °C (-40 °F to +176 °F)
Temperature Resolution 0.01 °C (0.018 °F)
Temperature Calibrated Accuracy ±0.5 °C (0 °C to 55 °C), ±0.9 °F (32 °F to 122 °F)
Humidity
Humidity Sensor Capacitive Polymer
Humidity Range 0 %RH to 100 %RH (non-condensing)
Humidity Resolution 0.1 %RH
Humidity Calibrated Accuracy ±3 %RH maximum
Humidity Specified Accuracy Range 25 %RH to 75 %RH
+20 °C to +40 °C
Hysteresis Error 1 % Typical,
3% Maximum
제품 정보
RHTemp1000Ex는 위험 지역과 본질 안전 글로벌 인증 (ATEX, IECEx, FM 3610)을 제공하는 컴팩트한 온/습도 데이터로거입니다.
이 종류의 데이터로거는 다음에 대해 본질 안전 인증을 받았습니다.
• 전기 보호 개념: ISO / IEC : 60079-11 Ex ia – Exic, 본질 안전 구역 0-2
• 장비 보호 레벨: Ga – Gc, 구역 0-2
• 가스 그룹: IIA – IIC
• 온도 등급: T4
이 장치는 -40 °C ~ + 80 °C (-40 °F ~ + 176 °F)의 온도를 ± 0.5 °C (0 °C ~ ± 50 °C) 및 ± 0.9 ° F의 정확도로 측정하고 기록합니다. (32 °F ~ 122 °F).
RHTemp1000Ex는 최대 32,767 개의 시간 및 날짜 스탬프 판독 값을 저장할 수 있으며 최대 24 개월 전에 시작하도록 프로그래밍 할 수 있습니다.
RHTemp1000Ex는 최신 MadgeTech 4 소프트웨어와 호환되어 간단하고 쉽게 시작, 중지 및 다운로드 할 수 있습니다.
그래픽, 테이블 및 요약 데이터가 분석을 위해 제공되며 사용자 정의 가능한 엔지니어링 단위로 볼 수 있습니다.
· 제품 사양
General
| Memory | 32,767 readings |
| Reading Rate | 1 reading every 2 seconds up to 1 reading every 12 hours |
| Battery Life | 2 years typical at 15 minute reading rate |
| Material | 316 Stainless Steel/Radel |
| Dimensions | 1.7 in x 0.97 in x 0.97 in (42 mm x 24.6 mm x 24.6 mm) |
| IP Rating | (Not Rated) Caution: Do not submerge this product to retain IS rating. |
| Operating Environment | -40 °C to +80 °C (-40 °F to +176 °F), 0 %RH to 95 %RH (case properly sealed) |
| Required Interface Package | IFC400 or IFC406 |
| Approvals | CE ATEX IECEx FM 3610 |
Temperature
| Temperature Sensor | Resistance Temperature Detector (RTD) |
| Temperature Range | -40 °C to +80 °C (-40 °F to +176 °F) |
| Temperature Resolution | 0.01 °C (0.018 °F) |
| Temperature Calibrated Accuracy | ±0.5 °C (0 °C to 55 °C), ±0.9 °F (32 °F to 122 °F) |
Humidity
| Humidity Sensor | Capacitive Polymer |
| Humidity Range | 0 %RH to 100 %RH (non-condensing) |
| Humidity Resolution | 0.1 %RH |
| Humidity Calibrated Accuracy | ±3 %RH maximum |
| Humidity Specified Accuracy Range | 25 %RH to 75 %RH +20 °C to +40 °C Hysteresis Error 1 % Typical, 3% Maximum |
견적의뢰
자주하는 질문
블로그
스마스 스토어